FL4810 remote location lights-xian sales

Brand: and honor the climbing lighting

Type: S-FL4810

Name: remote location lamp

Origin: Shanghai

A remote location, FL4810 lamp application places:

Is suitable for power, railway, industrial mining enterprises etc and the place for mobile signal indication and warning signs.

Apply to all kinds of construction, emergency rescue and ambulance staff for warning signs, party a instructions and signal with contact.

Second, FL4810 remote location lamp structure characteristics:

1, in not below 4800 m distance has the strong signal and warning effect, especially suitable for railway and highway inspection, operation personnel as well as the traffic police and other special operation staff use.

2, a full of electricity the continuous time after flashing not less than 10 hours, can meet the needs of the work on duty.

3, high-energy battery charging and discharging without memory environmental protection performance is good, low self-discharge, circulation long life. The shell is made of imported materials, rubber bulletproof can withstand powerful collisions and impact.

4, shell protection class IP65 design, can according to resist water cannon point-blank, heavy rains spray and the waves sputtering.

5, small volume, light weight, known as the belt or hangs over the other parts of the body to use, also can use magnetic adsorption in the object surface or fixed steel sling support in use.

6, red, yellow, green can be either.

Three, FL4810 remote location lamp technology parameters:

FL4810 remote location lamp rated voltage 2.4 V

FL4810 remote location lamp the rating capacity 2000 mAh

FL4810 remote location lights flash 1.5 + 0.5 Hz ac frequency

FL4810 remote location lamp average current 160 mA

FL4810 remote location continuous working time > 10 lamp h

FL4810 remote location lamp charging time 8 ~ 10 h

FL4810 remote location light weight 0.29 kg

FL4810 remote location lamp shell protection class IP65

Four, FL4810 remote location lamp instructions:

1, start and closed: turn the bottom can be opened or closed, switch orientation lamp.

2, wearing way:

Clip: open steel clip, buckle the belt or soft support known.

Hang: hang with hook in support of body.

Band: using this product display back will position into the light or waist ku in other parts of the body.

Adsorption: lamps and lanterns can adsorption in the back magnet for steel surface.

Five, FL4810 remote location the lamp to make note:

1, carry or transportation, shall ensure that button to switch from external things, lest through contact with low power consumption.

2, in the environment of high temperature place for charging or discharge, lamps and lanterns cylinder, a slight fever is a normal phenomenon.

3, can only use supporting the special charger to lamps and lanterns to charge.

4, don't change at will light source, the structure and seals remove lamps and lanterns.

5, in corrosive environment after use should be KaiShi surface.

6, battery used up please charge in time.

Six, FL4810 remote location the lamp to make quality guarantee

The products strictly according to ISO9001:2000 international quality management system standard quality control, ensure the quality of product is higher than the national standard, fully meet the design requirement, the products implement 3 years maintenance warranty light source with (1 year). Since the purchase date 3 years, the products under normal use any failure by the company responsible for free maintenance

Six, welcome to visit our website: www.shrpzm.com have released more high-quality goods!!!!!!!!!!!!!!!!!!!!

Above intellectual property ownership and Shanghai rong climbing lighting equipment Co., LTD.

.